--- title: "Cantilever Rack in Auburn, WA" url: https://seattlepalletracks.com/service-area/auburn/cantilever-rack description: "Cantilever rack in Auburn: extrusion support and machining returns. Call (206) 984-1601." lang: en --- Image: Cantilever Rack system inside a Washington warehouse (https://seattlepalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Auburn, Washington # Cantilever Rack in Auburn, WA Cantilever rack in Auburn gives aerospace suppliers a separate home for long extrusion, pipe and bar stock without front columns interrupting access. Projecting arms carry material back to upright columns and bases, leaving the loading face open for bundles that cannot be treated as ordinary pallets. Start with the longest piece and the smallest remaining bundle. Those two conditions can demand different support arrangements, especially when partially consumed stock returns from cutting. Arm spacing must protect the material throughout its working life, not just when a complete delivery arrives. The cantilever rack review for Auburn records these operating differences before equipment selection. (206) 984-1601 ## Build cantilever racking around extrusion lengths We examine where each bundle contacts its supports. Several arms may carry one load, but contact and stiffness determine the reaction at each point; dividing total weight by arm count does not establish an acceptable arm capacity. Uneven packing can concentrate weight on fewer supports. Arm length follows bundle depth and the required placement position. Upright selection then accounts for the proposed elevations, cumulative supported weight and configuration. A taller column or another arm level is not automatically compatible with an existing arrangement, even when individual bundles remain unchanged. Seattle Pallet Racks operates as a division of Warehouse Equipment & Supplies Co.; our parent has been supplying and installing storage equipment since 1997. For this project, we translate material measurements into an equipment schedule rather than treating every extrusion bundle alike. Longest extrusion and shortest remnant Bundle depth at the receiving face Documented weight at each support Image: Cantilever warehouse racking holding steel tubing (https://seattlepalletracks.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://seattlepalletracks.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Plan for aerospace material handoffs Along C Street SW, aerospace support storage may need to release individual profiles beside full bundles. West Valley Hwy industrial operations can face the same distinction between incoming stock and cut material. Separate locations should keep identification visible while giving both lengths enough supporting arms. aerospace supply production support and regional distribution ## Specify cantilever rack arms and uprights together Single-sided storage can serve a perimeter, while double-sided uprights create two working faces in an open area. The latter needs usable access on both sides and a capacity review for its intended loading conditions. Neither option removes the need to account for base projection and approaching forks. For indoor stock, consider moisture carried in with deliveries; for outdoor positions, establish the expected wet exposure before choosing finishes and component details. Pipe restraints and any sheet-support accessories must suit their specific loads. Selective pallet rack remains the alternative for boxed components supported on pallets, not a substitute for long-stock support planning. A Free Design Consultation reviews the arm schedule and material examples. We schedule experienced installation crews and manage their work against the agreed arrangement, including staging and access boundaries. Handover should identify arm ratings, upright limits and the approved bundle positions before the first extrusion is placed. Machining extrusion bundles needing open access Bar stock withdrawn in changing quantities Sheet packs requiring defined support surfaces Auburn storage services: https://seattlepalletracks.com/service-area/auburn Long-load storage options: https://seattlepalletracks.com/products/cantilever-rack Compare drive-in in Auburn: https://seattlepalletracks.com/service-area/auburn/drive-in-rack Full-pallet rotation in Auburn: https://seattlepalletracks.com/service-area/auburn/pallet-flow-rack Call (206) 984-1601: (206) 984-1601 ## Evaluate the cantilever storage rack footprint A cantilever rack drawing should connect support positions with the actual pickup movement. These checks establish whether the proposed arrangement accommodates full deliveries, smaller remnants and the truck carrying them. 1 ### Measure the profiles Record full lengths, bundle depths and the weight range, including offcuts that will return to storage after machining or fabrication. 2 ### Locate support contacts Show the number and spacing of arms beneath each material family, reviewing stiffness and concentrated reactions rather than assuming equal weight shares. 3 ### Trace vehicle movement Compare a forklift carrying stock crosswise with a sideloader carrying it lengthwise, using the real load envelope through turns and placement. 4 ### Confirm elevations Select arm levels around lift access, bundle height and upright capacity, then document which material group belongs at each position. ## Cantilever Rack System Details Cantilever warehouse racking holding steel tubing Cantilever rack storing lumber and wood products Image: Cantilever rack arms set up inside an industrial warehouse (https://seattlepalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Cantilever rack arms set up inside an industrial warehouse ## Discuss your Auburn material plan Send representative bundle measurements and a sketch of the pickup route. Include photographs showing how shorter pieces return to storage. Call (206) 984-1601. ### Seattle Pallet Racks 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 (206) 984-1601 Monday - Friday: 8:00 AM - 6:00 PM ## Questions from aerospace storage buyers ### Can Auburn aerospace extrusions share arms with shorter remnants? ### What should C Street SW buyers show for a wall run? ### Do West Valley Hwy deliveries justify outdoor storage? ### Should an aerospace supplier move boxed fasteners onto arms? ## Other Warehouse Storage Services in Auburn ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://seattlepalletracks.com/service-area/auburn ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://seattlepalletracks.com/service-area/auburn/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://seattlepalletracks.com/service-area/auburn/pallet-flow-rack ### Drive-In Rack Deep storage lanes replace interior access aisles; the forklift enters the structure to handle bulk pallets. View details https://seattlepalletracks.com/service-area/auburn/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://seattlepalletracks.com/service-area/auburn/carton-flow-rack ### Warehouse Relocation Tear down, label, coordinate transport and reinstall your warehouse storage around the next building's layout. View details https://seattlepalletracks.com/service-area/auburn/warehouse-relocation ## Nearby Areas We Also Serve We also review long-material storage for surrounding valley manufacturing operations. Cantilever Rack in Seattle: https://seattlepalletracks.com/service-area/seattle/cantilever-rack Cantilever Rack in Kent: https://seattlepalletracks.com/service-area/kent/cantilever-rack Cantilever Rack in Tacoma: https://seattlepalletracks.com/service-area/tacoma/cantilever-rack Cantilever Rack in Bellevue: https://seattlepalletracks.com/service-area/bellevue/cantilever-rack Cantilever Rack in Renton: https://seattlepalletracks.com/service-area/renton/cantilever-rack Cantilever Rack in Sumner: https://seattlepalletracks.com/service-area/sumner/cantilever-rack View All Service Areas: https://seattlepalletracks.com/service-area ## Where We Work Located in Seattle's industrial area, we serve the entire Puget Sound region with industrial pallet racks and warehouse storage solutions. ### Seattle Pallet Racks #### Address 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 #### Phone (206) 984-1601 Get Directions: https://www.google.com/maps/dir/?api=1&destination=Seattle%20Pallet%20Racks%2C%206727%20Martin%20Luther%20King%20Jr%20Way%20S%2C%20Ste%20M%20%231036%2C%20Seattle%2C%20WA%2098118 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Auburn? Give every extrusion a defined support position. (206) 984-1601 Tap to Call: (206) 984-1601 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "alternateName": "Seattle Pallet Racks - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Seattle, WA. Free warehouse design consultations, new pallet rack supply and managed installation across the Puget Sound region.", "url": "https://seattlepalletracks.com", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "47.5414", "longitude": "-122.2818" }, "areaServed": { "@type": "City", "name": "Auburn", "containedInPlace": { "@type": "State", "name": "Washington" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://seattlepalletracks.com/images/logo.png", "sameAs": [ "https://facebook.com/seattlepalletracks", "https://linkedin.com/company/seattlepalletracks", "https://instagram.com/seattlepalletracks" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://seattlepalletracks.com/service-area/auburn/cantilever-rack#service", "name": "Cantilever Rack in Auburn, WA", "serviceType": "Cantilever Rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "url": "https://seattlepalletracks.com/service-area/auburn/cantilever-rack", "provider": { "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S, Ste M #1036", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" } }, "areaServed": [ { "@type": "City", "name": "Auburn", "containedInPlace": { "@type": "State", "name": "Washington" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://seattlepalletracks.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://seattlepalletracks.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Auburn", "item": "https://seattlepalletracks.com/service-area/auburn" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://seattlepalletracks.com/service-area/auburn/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can Auburn aerospace extrusions share arms with shorter remnants?", "acceptedAnswer": { "@type": "Answer", "text": "Only where every stored length retains enough contact points. A remnant can miss the outer supports that carry full bundles, so separate spacing or dedicated positions may be needed." } }, { "@type": "Question", "name": "What should C Street SW buyers show for a wall run?", "acceptedAnswer": { "@type": "Answer", "text": "Provide bundle depth, available wall length and the forklift approach. The single-sided base occupies working space, and the longest profile still needs room to turn into position." } }, { "@type": "Question", "name": "Do West Valley Hwy deliveries justify outdoor storage?", "acceptedAnswer": { "@type": "Answer", "text": "Delivery origin does not decide suitability. Explain expected wet exposure and the material's protection requirements so the rack finish and storage location can be considered together." } }, { "@type": "Question", "name": "Should an aerospace supplier move boxed fasteners onto arms?", "acceptedAnswer": { "@type": "Answer", "text": "Usually the palletized cartons belong in selective storage. Reserve projecting arms for loads whose length or shape benefits from an unobstructed face and properly distributed support." } } ] } ] ```