--- title: "Cantilever Rack in Lynnwood, WA" url: https://seattlepalletracks.com/service-area/lynnwood/cantilever-rack description: "Cantilever rack in Lynnwood: trim depth and flex-building turns. Call (206) 984-1601." lang: en --- Image: Cantilever Rack system inside a Washington warehouse (https://seattlepalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Lynnwood, Washington # Cantilever Rack in Lynnwood, WA Cantilever rack in Lynnwood provides open-front support for long building products in flex space where pallet positions cannot accommodate their shape. Arms project from upright columns with no front columns across the face, letting material be approached along the length of the stored bundle. An office-and-warehouse building can make the handling route more restrictive than the available storage height. We start with bundle depth, support intervals and the truck movement, then consider additional levels. A run is only useful when the longest piece can reach its assigned position without borrowing unrelated working space. The cantilever rack review for Lynnwood records these operating differences before equipment selection. (206) 984-1601 ## Coordinate cantilever racking supports with building access Double-sided equipment can serve two approaches, but a drawing should not count an inaccessible face as useful capacity. Single-sided storage still requires room for bases, forks and the lift-off movement. Upright loading must match the chosen configuration and the weight intended at every level, including future changes proposed during planning. Indoor locations may receive damp lumber or wet pipe from unloading; outdoor locations face direct exposure. Describe both conditions so finishes and material protection can be discussed realistically. Sheet packs can need added bearing coverage, and round stock may need specified retention. Those details should accompany the arm schedule rather than being assumed from a product label. A Free Design Consultation compares that schedule with selective pallet rack for wholesale cartons and packaging supplies. Our team manages experienced installation crews scheduled around the agreed access arrangement. Handover should make arm capacities, upright limits and approved storage positions clear to staff who later replenish the flex-space inventory. Long trim serving building-product orders Pipe and bar with defined contact spacing Sheet packs stored apart from palletized supplies Lynnwood storage services: https://seattlepalletracks.com/service-area/lynnwood Long-load storage options: https://seattlepalletracks.com/products/cantilever-rack Compare drive-in in Lynnwood: https://seattlepalletracks.com/service-area/lynnwood/drive-in-rack Full-pallet rotation in Lynnwood: https://seattlepalletracks.com/service-area/lynnwood/pallet-flow-rack Call (206) 984-1601: (206) 984-1601 ## Plan cantilever storage rack depth before height Arm length must suit the real stored depth, including wrapping and any spacers beneath the material. Capacity is evaluated for that selected reach and loading position. The uprights and bases must then support the intended combination of levels rather than being judged by one arm rating alone. Material spanning several arms does not necessarily distribute its weight equally. Irregular packs or flexible sections can change contact and concentrate reactions. We consider stiffness, bearing locations and the shortest retained lengths together, since a remnant that misses the outer supports may need a distinct position or another support pattern. For storage projects, Seattle Pallet Racks is a division under Warehouse Equipment & Supplies Co.; the parent has continued supplying and installing equipment since 1997. Our equipment review distinguishes a long-material requirement from the conventional pallet inventory in the same flex building. Pack depth with all protective packaging Minimum retained section length Truck turns beside existing work areas Image: Cantilever warehouse racking holding steel tubing (https://seattlepalletracks.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://seattlepalletracks.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Fit arms to the flex-building route Along Highway 99, building-product storage can share a building with office functions. Alderwood industrial wholesale and packaging operations may combine long profiles with palletized supplies. Map the intended material route before allocating arm levels, keeping separate handling tasks from competing for the same narrow approach. contractor supply wholesale trade and local distribution ## Work through cantilever rack placement and retrieval A cantilever racking drawing should show more than the final resting place of stock. We follow the bundle as it enters the storage area, rises to its level and clears the arms during withdrawal. 1 ### Identify long-stock forms Separate pipe, trim, bar and sheet packs from palletized packaging, recording dimensions and how each group is normally issued or returned. 2 ### Locate bearing points Review support intervals against material stiffness, identifying uneven contact and shorter pieces that cannot safely span the same locations as full stock. 3 ### Compare vehicle geometry Trace the crosswise load of a forklift and the lengthwise load of a sideloader, checking actual machine dimensions through the available turns. 4 ### Confirm usable faces Evaluate a single-sided edge run against a double-sided arrangement, showing base projection and the access required to work each proposed face. ## Cantilever Rack System Details Cantilever warehouse racking holding steel tubing Cantilever rack storing lumber and wood products Image: Cantilever rack arms set up inside an industrial warehouse (https://seattlepalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Cantilever rack arms set up inside an industrial warehouse ## Discuss the route before the run Provide a floor sketch showing the tightest turn, together with full pack dimensions and the shortest pieces you retain. Include the truck model. Call (206) 984-1601. ### Seattle Pallet Racks 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 (206) 984-1601 Monday - Friday: 8:00 AM - 6:00 PM ## Buyer questions for flex-space storage ### Can Lynnwood wholesalers select arms from available floor depth? ### What should Highway 99 flex tenants show on a sketch? ### Could Alderwood packaging operations use arms for every supply? ### How should building-product buyers describe occasional damp lumber? ## Other Warehouse Storage Services in Lynnwood ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://seattlepalletracks.com/service-area/lynnwood ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://seattlepalletracks.com/service-area/lynnwood/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://seattlepalletracks.com/service-area/lynnwood/pallet-flow-rack ### Drive-In Rack Deep storage lanes replace interior access aisles; the forklift enters the structure to handle bulk pallets. View details https://seattlepalletracks.com/service-area/lynnwood/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://seattlepalletracks.com/service-area/lynnwood/carton-flow-rack ### Warehouse Relocation Tear down, label, coordinate transport and reinstall your warehouse storage around the next building's layout. View details https://seattlepalletracks.com/service-area/lynnwood/warehouse-relocation ## Nearby Areas We Also Serve We review similar long-product storage needs across nearby north-end flex facilities. Cantilever Rack in Seattle: https://seattlepalletracks.com/service-area/seattle/cantilever-rack Cantilever Rack in Kent: https://seattlepalletracks.com/service-area/kent/cantilever-rack Cantilever Rack in Tacoma: https://seattlepalletracks.com/service-area/tacoma/cantilever-rack Cantilever Rack in Bellevue: https://seattlepalletracks.com/service-area/bellevue/cantilever-rack Cantilever Rack in Auburn: https://seattlepalletracks.com/service-area/auburn/cantilever-rack Cantilever Rack in Renton: https://seattlepalletracks.com/service-area/renton/cantilever-rack View All Service Areas: https://seattlepalletracks.com/service-area ## Where We Work Located in Seattle's industrial area, we serve the entire Puget Sound region with industrial pallet racks and warehouse storage solutions. ### Seattle Pallet Racks #### Address 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 #### Phone (206) 984-1601 Get Directions: https://www.google.com/maps/dir/?api=1&destination=Seattle%20Pallet%20Racks%2C%206727%20Martin%20Luther%20King%20Jr%20Way%20S%2C%20Ste%20M%20%231036%2C%20Seattle%2C%20WA%2098118 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Lynnwood? Let the material route shape the arm arrangement. (206) 984-1601 Tap to Call: (206) 984-1601 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "alternateName": "Seattle Pallet Racks - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Seattle, WA. Free warehouse design consultations, new pallet rack supply and managed installation across the Puget Sound region.", "url": "https://seattlepalletracks.com", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "47.5414", "longitude": "-122.2818" }, "areaServed": { "@type": "City", "name": "Lynnwood", "containedInPlace": { "@type": "State", "name": "Washington" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://seattlepalletracks.com/images/logo.png", "sameAs": [ "https://facebook.com/seattlepalletracks", "https://linkedin.com/company/seattlepalletracks", "https://instagram.com/seattlepalletracks" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://seattlepalletracks.com/service-area/lynnwood/cantilever-rack#service", "name": "Cantilever Rack in Lynnwood, WA", "serviceType": "Cantilever Rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "url": "https://seattlepalletracks.com/service-area/lynnwood/cantilever-rack", "provider": { "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S, Ste M #1036", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" } }, "areaServed": [ { "@type": "City", "name": "Lynnwood", "containedInPlace": { "@type": "State", "name": "Washington" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://seattlepalletracks.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://seattlepalletracks.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Lynnwood", "item": "https://seattlepalletracks.com/service-area/lynnwood" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://seattlepalletracks.com/service-area/lynnwood/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can Lynnwood wholesalers select arms from available floor depth?", "acceptedAnswer": { "@type": "Answer", "text": "Floor depth is only one constraint. Bundle reach, support capacity and the vehicle's placement movement must all fit before the arm length and run position are settled." } }, { "@type": "Question", "name": "What should Highway 99 flex tenants show on a sketch?", "acceptedAnswer": { "@type": "Answer", "text": "Include office boundaries, existing work areas and the complete long-load route. Show where the truck turns and where the material ends project during pickup." } }, { "@type": "Question", "name": "Could Alderwood packaging operations use arms for every supply?", "acceptedAnswer": { "@type": "Answer", "text": "Palletized packaging usually suits selective positions. Arms address the support needs of long profiles or awkward stock, not every item handled within a packaging business." } }, { "@type": "Question", "name": "How should building-product buyers describe occasional damp lumber?", "acceptedAnswer": { "@type": "Answer", "text": "State how it arrives, how long it remains wet and whether storage is inside or exposed. Those conditions inform finish and protection choices alongside the structural component review." } } ] } ] ```