--- title: "Cantilever Rack in Redmond, WA | Profile Storage" url: https://seattlepalletracks.com/service-area/redmond/cantilever-rack description: "Cantilever rack in Redmond for profiles and sheet stock. Review arm capacities and flex-building access. Call (206) 984-1601." lang: en --- Image: Cantilever Rack system inside a Washington warehouse (https://seattlepalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Redmond, Washington # Cantilever Rack in Redmond, WA Cantilever rack in Redmond gives long hardware profiles a defined storage position while leaving their loading face free of front columns. Projecting arms connect to uprights, supporting bar, pipe, tube, lumber or sheet at selected contact points rather than enclosing the material between pallet rack frames. In Eastside flex space, the difficult measurement is often the room needed to retrieve a bundle beside assembly work. A compact storage footprint means little if the longest section cannot leave its position. We begin with the material envelope and follow it through receiving, storage and withdrawal. (206) 984-1601 ## Match cantilever racking to changing profile lengths Review full bundles alongside the shorter pieces returned after cutting. A support pattern that suits incoming lengths may leave remnants resting on too few arms. Thin tube and flexible profiles also need attention to deflection between contacts; material stiffness matters as much as the overall bundle weight. The arm rating must apply to its specified reach and loading arrangement. Uprights carry the reactions from several levels, so individual arm capacities cannot simply be added into an unrestricted column allowance. Identify which positions may be occupied together, including one-sided loading on a double-sided row. Seattle Pallet Racks is a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. We turn the material survey into a written component schedule, with experienced installation crews we schedule and manage working from the agreed arrangement rather than choosing elevations during unloading. Full profiles beside retained offcuts Bundle depth at each working level Access from storage to assembly Image: Cantilever warehouse racking holding steel tubing (https://seattlepalletracks.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://seattlepalletracks.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Protect the Willows Road assembly route Willows Road and the SR-520 corridor provide Redmond context for light-industrial and tech-hardware storage. In a flex building shared with assembly, mark the long-load withdrawal path separately from boxed-component picking. Door openings, internal columns and temporary receiving positions belong on the same drawing as the proposed storage run. technology hardware precision assembly and specialty fulfillment ## Walk a cantilever storage rack pick before quoting A cantilever rack handling cycle exposes restrictions that a floor-area calculation misses. Compare the truck, its attachment and the longest carried section in their actual working positions, then use those observations to settle the equipment proposal. 1 ### Group support needs Sort rigid bar, flexible tube and sheet packs by length, depth and handling method. Record partial bundles as separate operating conditions rather than assuming every pick removes the whole delivery. 2 ### Check the working reach Match arm projection to the intended load position and fork approach. Explain where wrapping, banding or irregular edges change contact, and verify the applicable capacity with that placement in mind. 3 ### Compare truck movements Trace a conventional forklift carrying material crosswise and a side-loader carrying it lengthwise. Include entry through doors and withdrawal beside assembly benches, not just travel along an empty aisle. 4 ### Set installation boundaries Agree where components can be staged without interrupting the identified material route. Review arm elevations and position labels before loading, with the completed arrangement anchored to the floor. ## Choose cantilever rack faces and exposure deliberately Single-sided columns can organize a perimeter position, but the base and loaded arms still project into usable space. Double-sided storage provides opposing faces only where both approaches remain available. Compare the entire occupied footprint rather than describing either arrangement as automatically smaller or easier to work around. Indoor storage can keep sensitive hardware away from direct rainfall. Outdoor or covered positions need an exposure discussion covering rack finish, component suitability and the material's own protection. Sheet packs may require manufacturer-approved supports beyond bare arms; an open front does not make every sheet orientation acceptable. Selective pallet rack remains appropriate for boxed assemblies supported on pallets. Keep those positions distinct from long profiles so a shared aisle does not become an improvised storage zone. A Free Design Consultation can review both tasks together, then identify what belongs on arms and what should stay within pallet positions. Long enclosures awaiting assembly Tube bundles with returning remnants Sheet packs needing specified support Redmond storage services: https://seattlepalletracks.com/service-area/redmond Long-load storage options: https://seattlepalletracks.com/products/cantilever-rack Compare drive-in in Redmond: https://seattlepalletracks.com/service-area/redmond/drive-in-rack Full-pallet rotation in Redmond: https://seattlepalletracks.com/service-area/redmond/pallet-flow-rack Call (206) 984-1601: (206) 984-1601 ## Cantilever Rack System Details Cantilever warehouse racking holding steel tubing Cantilever rack storing lumber and wood products Image: Cantilever rack arms set up inside an industrial warehouse (https://seattlepalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Cantilever rack arms set up inside an industrial warehouse ## Bring your Redmond cantilever rack handling cycle into the discussion Send representative profile dimensions, bundle weights and photographs of the route into assembly. Note whether indoor storage or exterior receiving is involved. Call (206) 984-1601. ### Seattle Pallet Racks 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 (206) 984-1601 Monday - Friday: 8:00 AM - 6:00 PM ## Questions about profiles in shared flex space ### Can Redmond hardware profiles and short remnants share a position? ### How should we select arm capacity for mixed bundles? ### Does a Willows Road flex unit need a side-loader? ### Can loose sheet material rest directly on projecting arms? ## Other Warehouse Storage Services in Redmond ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://seattlepalletracks.com/service-area/redmond ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://seattlepalletracks.com/service-area/redmond/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://seattlepalletracks.com/service-area/redmond/pallet-flow-rack ### Drive-In Rack Deep storage lanes replace interior access aisles; the forklift enters the structure to handle bulk pallets. View details https://seattlepalletracks.com/service-area/redmond/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://seattlepalletracks.com/service-area/redmond/carton-flow-rack ### Warehouse Relocation Tear down, label, coordinate transport and reinstall your warehouse storage around the next building's layout. View details https://seattlepalletracks.com/service-area/redmond/warehouse-relocation ## Nearby Areas We Also Serve Separate Eastside sites should be reviewed using their own door clearances and material schedules. Cantilever Rack in Seattle: https://seattlepalletracks.com/service-area/seattle/cantilever-rack Cantilever Rack in Kent: https://seattlepalletracks.com/service-area/kent/cantilever-rack Cantilever Rack in Tacoma: https://seattlepalletracks.com/service-area/tacoma/cantilever-rack Cantilever Rack in Bellevue: https://seattlepalletracks.com/service-area/bellevue/cantilever-rack Cantilever Rack in Auburn: https://seattlepalletracks.com/service-area/auburn/cantilever-rack Cantilever Rack in Renton: https://seattlepalletracks.com/service-area/renton/cantilever-rack View All Service Areas: https://seattlepalletracks.com/service-area ## Where We Work Located in Seattle's industrial area, we serve the entire Puget Sound region with industrial pallet racks and warehouse storage solutions. ### Seattle Pallet Racks #### Address 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 #### Phone (206) 984-1601 Get Directions: https://www.google.com/maps/dir/?api=1&destination=Seattle%20Pallet%20Racks%2C%206727%20Martin%20Luther%20King%20Jr%20Way%20S%2C%20Ste%20M%20%231036%2C%20Seattle%2C%20WA%2098118 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Redmond? Give full profiles and returning pieces a planned location. (206) 984-1601 Tap to Call: (206) 984-1601 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "alternateName": "Seattle Pallet Racks - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Seattle, WA. Free warehouse design consultations, new pallet rack supply and managed installation across the Puget Sound region.", "url": "https://seattlepalletracks.com", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "47.5414", "longitude": "-122.2818" }, "areaServed": { "@type": "City", "name": "Redmond", "containedInPlace": { "@type": "State", "name": "Washington" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://seattlepalletracks.com/images/logo.png", "sameAs": [ "https://facebook.com/seattlepalletracks", "https://linkedin.com/company/seattlepalletracks", "https://instagram.com/seattlepalletracks" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://seattlepalletracks.com/service-area/redmond/cantilever-rack#service", "name": "Cantilever Rack in Redmond, WA", "serviceType": "Cantilever Rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "url": "https://seattlepalletracks.com/service-area/redmond/cantilever-rack", "provider": { "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S, Ste M #1036", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" } }, "areaServed": [ { "@type": "City", "name": "Redmond", "containedInPlace": { "@type": "State", "name": "Washington" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://seattlepalletracks.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://seattlepalletracks.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Redmond", "item": "https://seattlepalletracks.com/service-area/redmond" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://seattlepalletracks.com/service-area/redmond/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can Redmond hardware profiles and short remnants share a position?", "acceptedAnswer": { "@type": "Answer", "text": "They can only when both lengths retain the required support contacts. Record the shortest retained pieces during the survey; separate arm spacing or another location may be necessary after cutting." } }, { "@type": "Question", "name": "How should we select arm capacity for mixed bundles?", "acceptedAnswer": { "@type": "Answer", "text": "Use the weight and contact arrangement for each bundle at the proposed arm reach. Uneven reactions can prevent equal weight sharing, so dividing a total by the number of arms is not sufficient." } }, { "@type": "Question", "name": "Does a Willows Road flex unit need a side-loader?", "acceptedAnswer": { "@type": "Answer", "text": "Not necessarily; the decision follows the load envelope and available travel space. Compare actual truck movements through the unit before selecting a row arrangement or assuming a conventional forklift will fit." } }, { "@type": "Question", "name": "Can loose sheet material rest directly on projecting arms?", "acceptedAnswer": { "@type": "Answer", "text": "Only if the proposed supports suit its stiffness, orientation and handling method. Ask for an approved support arrangement; individual sheets and bundled packs can require different contact surfaces." } } ] } ] ```