--- title: "Warehouse Relocation in Seattle, WA | Rack Moving" url: https://seattlepalletracks.com/service-area/seattle/warehouse-relocation description: "Seattle warehouse relocation: rack teardown, labeled transport and reinstallation with a new layout drawing. Call (206) 984-1601." lang: en --- Image: Warehouse Relocation system inside a Washington warehouse (https://seattlepalletracks.com/assets/pallet-rack-hero-Bx52nYZg.jpg) Seattle, Washington # Warehouse Relocation in Seattle, WA Warehouse relocation in Seattle usually means reconciling older industrial space with a building that works differently. SODO, the Duwamish industrial area and Georgetown hold decades of tilt-up stock along I-5 and SR-99, and operations tied to the Port of Seattle terminals or the BNSF and Union Pacific intermodal yards often move within the same district. We start by comparing your existing rack with the destination floor plan, so retained equipment is allocated before anything comes down. Import, export and 3PL operations cannot simply stop while storage moves. A pallet rack relocation is phased so completed rows keep shipping while the next sections are emptied, dismantled, labeled and transported, with temporary holding locations agreed in advance. (206) 984-1601 ## Seattle rack relocation built on a component record Before dismantling, we document frame heights and depths, beam lengths, connector styles and accessories, then label every bundle for its assigned run on the new layout drawing. Hardware is segregated by system so connection parts remain traceable when several storage areas contribute to a single transport load. Seattle Pallet Racks is a division of Warehouse Equipment & Supplies Co., supplying and installing warehouse equipment since 1997. Experienced installation crews are scheduled and managed under a written scope that assigns equipment release, transport access and destination acceptance responsibilities before the physical work begins. A Free Design Consultation examines both floor plans, the current rack identification and the intended pallet loads. Components found damaged during teardown are set apart for replacement, and any compatible added new rack is itemized separately so the destination design rests on a clear material basis. Documented frame and beam inventory Destination layout drawing Agreed phasing and holding locations Image: Pallet rack rows reviewed for warehouse relocation planning (https://seattlepalletracks.com/assets/pallet-rack-2-je9-WSvK.jpg) Image: Selective rack components and beam levels to document before a move (https://seattlepalletracks.com/assets/selective-pallet-rack-CqoeOHx2.jpg) ### SODO and Duwamish move considerations Seattle's SODO and Georgetown buildings frequently combine receiving, staging and storage in older 20-28 ft clear space where every aisle position matters. For operations serving the port terminals or intermodal yards, the destination drawing should separate freight staging from rebuilt storage rows, and the phasing plan should name which dock doors and approaches the rack deliveries will use. port logistics food distribution and urban fulfillment ## Warehouse relocation: adding rack that matches what you kept Teardown inspection drives the reuse decision. Bent or damaged components and anything that cannot be identified are held for replacement rather than returned to accepted bundles, keeping the destination installation free of uncertain material. When the next building needs more storage than the old one, compatible new rack is added to match the retained system. Connection profiles and the intended loading arrangement are reviewed first, because teardrop-style components are not universally interchangeable even when they look alike. Final row placement follows the receiving drawing. Once the assembled rack is anchored to the floor, the installed beam levels and documented capacities are compared with the plan, and changes are recorded before operations allocates inventory to the completed area. Import and 3PL warehousing Seafood and grocery distribution Urban last-mile operations Seattle storage services: https://seattlepalletracks.com/service-area/seattle Warehouse move planning: https://seattlepalletracks.com/warehouse-relocation Compare pushback in Seattle: https://seattlepalletracks.com/service-area/seattle/pushback-rack Full-pallet rotation in Seattle: https://seattlepalletracks.com/service-area/seattle/pallet-flow-rack Call (206) 984-1601: (206) 984-1601 ## Running a phased warehouse relocation Each phase ties released inventory, identified equipment and confirmed destination access together, so the move does not depend on decisions made at the loading dock. 1 ### Define what keeps shipping Identify active orders and temporary holding locations, then mark the rack sections that can be emptied first without interrupting dispatch. 2 ### Teardown with inspection Dismantle released sections, inspect frames, beams and connections as they become accessible, and label bundles for their destination runs while segregating anything damaged. 3 ### Sequence transport to the new building Deliver labeled groups in phases matched to the destination's unloading space and assembly order, with a confirmed receiving window for each load. 4 ### Reinstall and verify before loading Erect retained and added rack per the drawing, anchor it to the floor, and check beam elevations and load information before pallets are assigned to rebuilt rows. ## Storage Systems We Relocate Pallet rack rows reviewed for warehouse relocation planning Selective rack components and beam levels to document before a move ## Plan your Seattle rack move Share both floor plans and your current rack identification. Call (206) 984-1601. ### Seattle Pallet Racks 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 (206) 984-1601 Monday - Friday: 8:00 AM - 6:00 PM ## Seattle warehouse move questions ### Can a Seattle move stay within SODO or Georgetown? ### How is rack relocation phased so we keep shipping? ### What if the new building needs more rack than we have? ### What do you need for a warehouse relocation quote? ## Other Warehouse Storage Services in Seattle ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://seattlepalletracks.com/service-area/seattle ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://seattlepalletracks.com/service-area/seattle/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://seattlepalletracks.com/service-area/seattle/pallet-flow-rack ### Drive-In Rack Deep storage lanes replace interior access aisles; the forklift enters the structure to handle bulk pallets. View details https://seattlepalletracks.com/service-area/seattle/drive-in-rack ### Cantilever Rack Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold. View details https://seattlepalletracks.com/service-area/seattle/cantilever-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://seattlepalletracks.com/service-area/seattle/carton-flow-rack ## Nearby Areas We Also Serve Moves to or from Tukwila, Renton, Kent and the wider Kent Valley can be planned from the same equipment inventory and the destination's floor plan. Warehouse Relocation in Kent: https://seattlepalletracks.com/service-area/kent/warehouse-relocation Warehouse Relocation in Tacoma: https://seattlepalletracks.com/service-area/tacoma/warehouse-relocation Warehouse Relocation in Bellevue: https://seattlepalletracks.com/service-area/bellevue/warehouse-relocation Warehouse Relocation in Auburn: https://seattlepalletracks.com/service-area/auburn/warehouse-relocation Warehouse Relocation in Renton: https://seattlepalletracks.com/service-area/renton/warehouse-relocation Warehouse Relocation in Sumner: https://seattlepalletracks.com/service-area/sumner/warehouse-relocation View All Service Areas: https://seattlepalletracks.com/service-area ## Where We Work Located in Seattle's industrial area, we serve the entire Puget Sound region with industrial pallet racks and warehouse storage solutions. ### Seattle Pallet Racks #### Address 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 #### Phone (206) 984-1601 Get Directions: https://www.google.com/maps/dir/?api=1&destination=Seattle%20Pallet%20Racks%2C%206727%20Martin%20Luther%20King%20Jr%20Way%20S%2C%20Ste%20M%20%231036%2C%20Seattle%2C%20WA%2098118 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Warehouse Relocation in Seattle? Allocate your retained rack to the new drawing before teardown begins. (206) 984-1601 Tap to Call: (206) 984-1601 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "alternateName": "Seattle Pallet Racks - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Seattle, WA. Free warehouse design consultations, new pallet rack supply and managed installation across the Puget Sound region.", "url": "https://seattlepalletracks.com", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "47.5414", "longitude": "-122.2818" }, "areaServed": { "@type": "City", "name": "Seattle", "containedInPlace": { "@type": "State", "name": "Washington" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://seattlepalletracks.com/images/logo.png", "sameAs": [ "https://facebook.com/seattlepalletracks", "https://linkedin.com/company/seattlepalletracks", "https://instagram.com/seattlepalletracks" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://seattlepalletracks.com/service-area/seattle/warehouse-relocation#service", "name": "Warehouse Relocation in Seattle, WA", "serviceType": "Warehouse Relocation", "description": "Tear down, label, coordinate transport and reinstall your warehouse storage around the next building's layout.", "url": "https://seattlepalletracks.com/service-area/seattle/warehouse-relocation", "provider": { "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S, Ste M #1036", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" } }, "areaServed": [ { "@type": "City", "name": "Seattle", "containedInPlace": { "@type": "State", "name": "Washington" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://seattlepalletracks.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://seattlepalletracks.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Seattle", "item": "https://seattlepalletracks.com/service-area/seattle" }, { "@type": "ListItem", "position": 4, "name": "Warehouse Relocation", "item": "https://seattlepalletracks.com/service-area/seattle/warehouse-relocation" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can a Seattle move stay within SODO or Georgetown?", "acceptedAnswer": { "@type": "Answer", "text": "Yes. Short-distance moves still need the same component record, labeling and destination drawing. The main difference is that transport phases can often be scheduled more tightly between nearby buildings." } }, { "@type": "Question", "name": "How is rack relocation phased so we keep shipping?", "acceptedAnswer": { "@type": "Answer", "text": "Active orders ship from completed or untouched rows while other sections are dismantled. Temporary holding locations and expected pauses are agreed in the written plan before teardown starts." } }, { "@type": "Question", "name": "What if the new building needs more rack than we have?", "acceptedAnswer": { "@type": "Answer", "text": "Compatible new rack is added and itemized separately from retained material. Compatibility at the connections and the intended loading arrangement are reviewed before new and existing components share a run." } }, { "@type": "Question", "name": "What do you need for a warehouse relocation quote?", "acceptedAnswer": { "@type": "Answer", "text": "Both buildings' drawings, photographs of the current rack with its elevations, and your pallet load requirements. Dock and approach constraints at the destination help set the transport phasing." } } ] } ] ```