--- title: "Cantilever Rack in Sumner, WA | Lumber Support Plans" url: https://seattlepalletracks.com/service-area/sumner/cantilever-rack description: "Cantilever rack in Sumner for lumber and long bundles. Compare arm levels, row faces and dispatch clearance. Call (206) 984-1601." lang: en --- Image: Cantilever Rack system inside a Washington warehouse (https://seattlepalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Sumner, Washington # Cantilever Rack in Sumner, WA Cantilever rack in Sumner gives lumber and building-material bundles an open loading face while supporting their length on arms fixed to uprights. Removing front columns from that face helps direct placement, but usable storage still depends on arm projection, support spacing and the vehicle carrying each load. North Pierce County bulk distribution buildings can offer substantial clear height without automatically providing usable long-stock positions. The practical question is which elevations the truck can reach with the intended bundle while preserving receiving and dispatch space below. We establish that operating envelope before proposing additional levels. (206) 984-1601 ## Compare cantilever storage rack rows before adding height Test the cantilever rack receiving cycle at floor level and at proposed upper positions. Available height does not eliminate handling restrictions. 1 ### Describe stock families Separate lumber, panels, tube and other long components by stiffness and bundle depth. Include wrapping and retained remnants in the measurements, along with the heaviest planned condition at each position. 2 ### Evaluate occupied faces Compare a perimeter run with a freestanding row approached from both sides. Mark base projection, loaded arm depth and the actual approach space, then review permitted loading for the selected configuration. 3 ### Test upper placement Check the truck's rated capability at the intended reach using the real bundle and attachment. Establish fork entry and withdrawal clearance at each elevation rather than treating every unused vertical gap as storage. 4 ### Sequence the work area Set component staging and assembly boundaries around agreed receiving needs. Verify the installed arm schedule, identify load limits and confirm the completed run is anchored to the floor before releasing it for stocking. ## Keep cantilever racking suited to lumber and sheet Single-sided storage concentrates access along one working face; double-sided storage offers two faces only if neither is blocked by staging. In a distribution operation, temporary outbound bundles can occupy those approaches. Treat order assembly as a separate footprint rather than borrowing the space required to remove stock from the row. Sheet packs may need approved support surfaces, while pipe or round stock can require appropriate retention details. The absence of front columns is useful for bulky material, but support still follows the material's orientation and handling method. Selective pallet rack is a separate choice for palletized boxed products that do not need long-span contact. Indoor and exterior locations should be specified with their exposure stated. The region's mild, wet climate makes finishes and stock protection part of an outdoor review, including covered receiving positions. A Free Design Consultation compares those conditions with the material list so an exterior location is not selected simply to free indoor floor space. Lumber packs awaiting dispatch Panel bundles with defined bearing Long tube kept apart from cartons Sumner storage services: https://seattlepalletracks.com/service-area/sumner Long-load storage options: https://seattlepalletracks.com/products/cantilever-rack Compare drive-in in Sumner: https://seattlepalletracks.com/service-area/sumner/drive-in-rack Full-pallet rotation in Sumner: https://seattlepalletracks.com/service-area/sumner/pallet-flow-rack Call (206) 984-1601: (206) 984-1601 ## Choose cantilever rack elevations by the working load Full lumber packs, shortened bundles and sheet products should be assessed as different support tasks. Flexible material needs contact points that limit sag; rigid bar can still load arms unevenly if its bundle is irregular. Record what remains after picking rather than designing solely around the first delivery. Arm length must accommodate the bundle's depth at its approved placement position. Its capacity belongs to that specified reach and loading condition, not to an interchangeable catalog number. The upright assembly then needs review for all proposed arm levels, including how inventory may be distributed across opposing faces. Seattle Pallet Racks operates as a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997. We prepare a material-based proposal and coordinate experienced installation crews we schedule and manage, with staging boundaries agreed before the storage area is occupied by equipment. Lumber packs before and after picking Truck reach with the carried bundle Receiving and dispatch space below arms Image: Cantilever warehouse racking holding steel tubing (https://seattlepalletracks.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://seattlepalletracks.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Leave valley dispatch movements room to operate SR-167 and SR-410 connect Sumner's north Pierce County valley distribution setting with neighboring Pacific. Building materials and lumber are relevant storage applications in this corridor. In newer bulk buildings with 32–40 ft clear height, assess lift reach and the loaded structure before using height; keep a defined transfer route between incoming bundles and their assigned positions. regional distribution third-party logistics and food supply ## Cantilever Rack System Details Cantilever warehouse racking holding steel tubing Cantilever rack storing lumber and wood products Image: Cantilever rack arms set up inside an industrial warehouse (https://seattlepalletracks.com/assets/cantilever-hero-3ef0AkpP.jpg) Cantilever rack arms set up inside an industrial warehouse ## Review Sumner cantilever rack bundles and lift reach Provide bundle dimensions, weights by material family and the handling truck's information. Include a sketch of incoming and outgoing staging. Call (206) 984-1601. ### Seattle Pallet Racks 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 (206) 984-1601 Monday - Friday: 8:00 AM - 6:00 PM ## Questions about levels and dispatch access ### Does a taller Sumner building mean we can add more arm levels? ### How should partly picked lumber packs be supported? ### Can a double-sided row serve SR-410 dispatch staging? ### What information belongs in a long-stock equipment quote? ## Other Warehouse Storage Services in Sumner ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://seattlepalletracks.com/service-area/sumner ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://seattlepalletracks.com/service-area/sumner/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://seattlepalletracks.com/service-area/sumner/pallet-flow-rack ### Drive-In Rack Deep storage lanes replace interior access aisles; the forklift enters the structure to handle bulk pallets. View details https://seattlepalletracks.com/service-area/sumner/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://seattlepalletracks.com/service-area/sumner/carton-flow-rack ### Warehouse Relocation Tear down, label, coordinate transport and reinstall your warehouse storage around the next building's layout. View details https://seattlepalletracks.com/service-area/sumner/warehouse-relocation ## Nearby Areas We Also Serve Each valley facility needs its own handling review. Cantilever Rack in Seattle: https://seattlepalletracks.com/service-area/seattle/cantilever-rack Cantilever Rack in Kent: https://seattlepalletracks.com/service-area/kent/cantilever-rack Cantilever Rack in Tacoma: https://seattlepalletracks.com/service-area/tacoma/cantilever-rack Cantilever Rack in Bellevue: https://seattlepalletracks.com/service-area/bellevue/cantilever-rack Cantilever Rack in Auburn: https://seattlepalletracks.com/service-area/auburn/cantilever-rack Cantilever Rack in Renton: https://seattlepalletracks.com/service-area/renton/cantilever-rack View All Service Areas: https://seattlepalletracks.com/service-area ## Where We Work Located in Seattle's industrial area, we serve the entire Puget Sound region with industrial pallet racks and warehouse storage solutions. ### Seattle Pallet Racks #### Address 6727 Martin Luther King Jr Way S Ste M #1036 Seattle, WA 98118 #### Phone (206) 984-1601 Get Directions: https://www.google.com/maps/dir/?api=1&destination=Seattle%20Pallet%20Racks%2C%206727%20Martin%20Luther%20King%20Jr%20Way%20S%2C%20Ste%20M%20%231036%2C%20Seattle%2C%20WA%2098118 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Sumner? Use the available height only where the load can be handled. (206) 984-1601 Tap to Call: (206) 984-1601 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "alternateName": "Seattle Pallet Racks - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Seattle, WA. Free warehouse design consultations, new pallet rack supply and managed installation across the Puget Sound region.", "url": "https://seattlepalletracks.com", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "47.5414", "longitude": "-122.2818" }, "areaServed": { "@type": "City", "name": "Sumner", "containedInPlace": { "@type": "State", "name": "Washington" } }, "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "17:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://seattlepalletracks.com/images/logo.png", "sameAs": [ "https://facebook.com/seattlepalletracks", "https://linkedin.com/company/seattlepalletracks", "https://instagram.com/seattlepalletracks" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "Service", "@id": "https://seattlepalletracks.com/service-area/sumner/cantilever-rack#service", "name": "Cantilever Rack in Sumner, WA", "serviceType": "Cantilever Rack", "description": "Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.", "url": "https://seattlepalletracks.com/service-area/sumner/cantilever-rack", "provider": { "@type": "LocalBusiness", "@id": "https://seattlepalletracks.com/#business", "name": "Seattle Pallet Racks", "telephone": "(206) 984-1601", "address": { "@type": "PostalAddress", "streetAddress": "6727 Martin Luther King Jr Way S, Ste M #1036", "addressLocality": "Seattle", "addressRegion": "WA", "postalCode": "98118", "addressCountry": "US" } }, "areaServed": [ { "@type": "City", "name": "Sumner", "containedInPlace": { "@type": "State", "name": "Washington" } } ] }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://seattlepalletracks.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://seattlepalletracks.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Sumner", "item": "https://seattlepalletracks.com/service-area/sumner" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://seattlepalletracks.com/service-area/sumner/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Does a taller Sumner building mean we can add more arm levels?", "acceptedAnswer": { "@type": "Answer", "text": "Not by height alone; the upright configuration and loaded truck capability must also support the proposal. Check bundle clearance and placement at every planned elevation before adding positions to the schedule." } }, { "@type": "Question", "name": "How should partly picked lumber packs be supported?", "acceptedAnswer": { "@type": "Answer", "text": "Keep enough suitable contacts beneath the remaining lengths and account for changes in bundle shape. Show the smallest retained pack during planning because its support needs may differ from those of a full shipment." } }, { "@type": "Question", "name": "Can a double-sided row serve SR-410 dispatch staging?", "acceptedAnswer": { "@type": "Answer", "text": "It can only where both loading approaches stay available during dispatch. Reserve staging separately on the drawing; otherwise outbound bundles may block the face needed to retrieve the next order." } }, { "@type": "Question", "name": "What information belongs in a long-stock equipment quote?", "acceptedAnswer": { "@type": "Answer", "text": "Supply material lengths, pack depths, weights, expected remnants and truck details. Add indoor or exterior exposure and proposed arm elevations so the proposal addresses support, access and the complete loading arrangement." } } ] } ] ```